Concrete mixing station engineering vehicle washer, enclosed stone yard vehicle washing platform, semi-enclosed roller vehicle washer for power plants.

Mixing Station Engineering Wheel Washer Quarry Enclosed Vehicle Washing Platform Power Plant Semi-Enclosed Roller Wheel Washer

This equipment utilizes 360-degree high-pressure water nozzles to wash the tires and chassis of vehicles, meeting the road requirements of various departments. The device employs mechanical sensing and automatic control, eliminating the need for manual operation. The washing water is recycled, significantly conserving water resources. The equipment is detachable for easy relocation and features dedicated stainless steel nozzles.

IV. Sludge Discharge

The sludge discharge machine is modular, allowing users to choose according to their needs.

This equipment is a chain-plate scraper, driven by a reducer to rotate the chains, using rubber plates to remove sediment particles from the sedimentation tank. (Users may also opt for manual sludge discharge.)

Our company specializes in manufacturing environmentally friendly wheel washing equipment and currently offers multiple models to meet the needs of various construction sites and work areas. A华丽的外表 cannot demonstrate true substance; it is the内在的品质 that highlights the quality of our products. Here is a friendly reminder about the correct operating procedures for the wheel washer to reduce unnecessary troubles.

Wheel Washer Operation:

1. Operators must be trained and familiar with the operating procedures before using the wheel washer.

2. Before switching on the power, ensure that the sensors and foot switches are functioning properly, the emergency stop switch is reset, the water level in the tank is within the washable range, and there are no unauthorized personnel in the washing area.

3. Close the main power circuit breaker; the power indicator will light up, and the wheel washer will enter standby mode.

4. Before a vehicle enters the wheel washer, inform the driver of the washing steps, drive slowly, avoid rapid impact, and ensure that all doors and windows are closed.

5. During the program operation, do not擅自关闭电源 to ensure the orderly progress of the entire washing process.

6. Regularly clean the sludge from the sedimentation tank to prevent it from flowing into the clean water tank and clogging the nozzles.

7. During operational intervals, perform cleaning and maintenance of the equipment, frequently check the nozzles and喷孔 for blockages to avoid affecting the washing效果.

8. Before performing any cleaning or maintenance,切断电源 first.

9. Absolutely avoid washing vehicles without water to prevent burning out the water pump.

Length × Width × Height

2600×3600×1300mm

Washing Method

Vehicle Self-Driven

Washing Options

Automatic, Manual

Washing Pressure

2-3kg/cm²

Power Supply

Three-phase 380V 50Hz

Power

3KW×2

Water Consumption

Recycled Water